How to put password in usb pen drive without any software?
1. Go to the flash drive, and put everything in one folder titled Flash
2.
On a computer, open up notepad (Start+R and type in ‘notepad’)
type:
@echo off
setlocal enabledelayedexpansion
title Password
:START
cls
echo Please Enter password…
echo.
set /p pass=Pass:
if /i ‘!pass!’==’ENTERYOURPASSWORDHERE’ goto next
cls
echo !pass! is not the password. Try again.
pause
goto START
:next
if exist D:/Flash (
set Jbe=D
)
if exist E:/Flash (
set Jbe=E
)
if exist F:/Flash (
set Jbe=F
)
if exist G:/Flash (
set Jbe=G
)
if exist H:/Flash (
set Jbe=H
)
if exist I:/Flash (
set Jbe=I
)
if exist J:/Flash (
set Jbe=J
)
if exist K:/Flash (
set Jbe=K
)
if exist L:/Flash (
set Jbe=L
)
if exist M:/Flash (
set Jbe=M
)
%Jbe%:
start explorer.exe Flash || goto ERROR
exit
:ERROR
cls
echo There was an error opening the file. Would you like
echo to try again???
echo.
set /p jam=Yes or No:
if /i ‘%jam%’==’yes’ goto next
if /i ‘%jam%’==’no’ goto seeya
cls
if not defined jam goto ERROR
echo %jam% is an invalid option. Try again.
pause
goto ERROR
:seeya
Cls
echo Well, see ya!
ping -n 2 127.0.0.1>nul
exit
Once you’ve copied and pasted that into notepad, save as Password.bat in your flash drive (don’t put it under any folders)
you can down this bat file from here.
Then, you go START+R and type in CMD.
Then, type in (THe drive is the letter with the colon that is assigned to your flash drive EX: J:, E:)
YOURDRIVE:
attrib Flash +s +h
EX:
E:
attrib Flash +s +h
Now, you need to put in the password to open your files. I know it’s a long process, but you’ll appreciate this in the long run. I use this for my flash drive, and it works great. If I made an error and it doesn’t work, post that.
Where it says YOURPASSWORDHERE, delete that and type in your password you wish to use to open your flash drive.
Source(s):
Upgrade Fireware of Samsung Galaxy Tab 2.2 into 2.3.3
Before, make you sure Galaxy Tab Drivers are installed. Either use KIES, Windows Update (Not sure if it will work this way) or download them from here (SAMSUNG_USB_Driver_for_Mobile_Phones_v1.3.350.0.exe)
You can get all important packages here.
Download these files and place them in a folder together on your desktop.
0. Preparing to Flashing the firmware
1. Take the main firmware and unzip the file using winzip or another extraction program. When it unzips you will be left w/ a .tar file. This is the file you will need to flash.
2. Unzip ODIN V1.7. You will have several files in the folder. you will use the file called Odin.exe
3. Unzip the pit file. you will be left w/ a .pit file
4. Unzip the dbdata file and you will be left w/ a file named dbdata.tar.
Take all those files and put them in a folder inside the main folder so they are in one spot and easy to find.
1. Flashing the Firmware
1. Double click ODIN.exe to run the program.
2. Make sure your tab to turned off. Hold the Power and Volume down button at the same time and it will have a android guy in a triangle w/ a shovel and hook it up to your computer. This is the download mode.
3. in the PDA section of odin place the main firmware .tar file in that section.
4. Place the .pit file in the pit section and make sure repartition is selected.
5. Hit start and it will flash the firmware.
2. Second Phase to flashing Firmware
you tab will reboot after the firmware flashes. Shut it down.
1. Place tab in DL mode again and hook it up to your computer. Power button and Volume Down at the same time.
2. Place dbdata.tar into the PDA section in ODIN (DO NOT SELECT REPARTITION)
3. Hit start and it will flash the .tar file.
4. Shut down the tab.
3. Phase Three of Flashing Firmware
We will be placing your tab into recovery mode. In Recovery Mode you will use the volume up and down keys to navigate and home key to select.
1. Hold Power and Volume up together.
2. Release Power after holding it for about 4-5 second and continue to hold the Volume Up button until recovery menu shows up.
3. Select wipe cache (When Done go to next step)
4. Select wipe data/factory reset.
5. Select reboot and you are done. You now have Android 2.3.3 Gingerbread.
4. Flashing of OPTIONAL rooted kernel GSM TABS ONLY
This is to be done after all the steps above have been done.
1. unzip the CFroot file and you will have a .tar file.
2. Start the ODIN program
3. put the .tar file in the PDA section in ODIN (DO NOT SELECT REPARTITION)
4. Place your tab into DL Mode and hook it up to your computer
5. Hit start
you will now have a rooted tab and ClockWorkMod recovery installed.
